Production of sliced veneer, rotary cut veneer, finger joint profiled, board
Read moreA sliced veneer obtained by cutting (slicing) the ordinary beam with blades which are designed for this on specialized machines. The final size in this case will be equal to the width of the beam. This kind of material is most often used when decorating facades of furniture or furnishing in general. If you want to demonstrate the richness and beauty of wood, then sliced veneer is exactly what you need.
Read moreRotary cut veneer is made of solid and soft wood species using special shelling machine, which is used in wood treatment. Usually it is a thin, wide, long, has a special “water” image, which is obtained from contact of the knife with the growth rings of a tree. In the production of veneer we use different types of wood: beech, alder, pine and aspen. The thickness of rotary cut veneer is 1.0-2.2 mm.
Read moreSplicing is a special procedure through which it became possible to produce of workpieces without knot sand workpieces of a certain quality. In our manufacture jointing of timber is carried out in several stages. Material for splicing is prepared in advance, and unacceptable defects of wood are removed (trimming and optimization) or getting the trimming of right size and quality. The next is splicing of material along the length of the mini-tenon. Mini-tenon, or notched-wedge spikes are cut with special cutters on tenon cutting machine
Read moreA lumber is obtained by the longitudinal division of round timber (logs), as well as the longitudinal and transverse dividing of parts. Such lumber as edged board and timber are the most popular in our time. Lumber edging and timber are characterized by exact geometric dimensions, linearity and stability of parameters during storage and transportation. Timber has been used for the production of furniture and building since ancient times
Read moreMainly, our company manufactures products from domestic and imported high quality wood. Our products are used in the production of furniture, doors, parquet, some decorative interior items. Depending on the order criteria, our firm makes an interline interval both from a tree with natural humidity, and with passing of technological process of heat treatment of wood. In the process of boiling and steaming the raw material, the stress between the wood fibers is reduced, which provides a better cut of veneer. The company is equipped with technological pools to ensure a quality process of heat treatment of wood, drying chambers to provide the required value of humidity, as well as presses to eliminate unwanted veneer corrugation.
WebTop 2020 site development